Local Shed Roof Felt Specialists in Bromley
Many garden sheds and timber outbuildings in Bromley eventually need a new felt covering as the original material begins to deteriorate. Traditional mineral felt is affordable and widely used, but years of rain, frost, sunlight and strong winds gradually cause it to crack, shrink or lift around the edges.
A small tear may allow repeated water ingress and eventually cause the timber deck to soften or rot. Dealing with worn felt before it fails completely may keep the work limited to a straightforward re-cover.
Shed-Roof.co.uk helps homeowners in Bromley find local contractors who carry out shed roof felt replacement. Submit the short form and compare quotations from up to four suitable local roofers.
Signs Your Shed Roof Felt Needs Replacing
Shed felt normally deteriorates gradually rather than failing all at once.
Common warning signs include:
- Felt that has become brittle and started breaking apart.
- Loose or lifted felt around the eaves and verges.
- Air or moisture trapped beneath the covering.
- Water entering between poorly sealed felt sections.
- Repeatedly failed patches.
- Damp patches on the underside of the roof boards.
- Plywood or OSB beneath the felt losing strength.
- Mineral granules wearing away.
- Organic growth building up around joints and edges.
- Parts of the covering becoming displaced.
Common Causes of Shed Felt Damage in Bromley
Age is one cause of failure, but installation quality and roof exposure also make a difference.
- Deterioration over time — bitumen-based felt gradually loses flexibility and becomes brittle.
- Long-term sun exposure — sunny and exposed roofs may deteriorate faster than shaded ones.
- Frost and temperature changes — temperature changes place stress on felt joints and edges.
- Edge contraction — ageing material can expose timber around the eaves and verges.
- Open seams — water can enter where the felt sheets are no longer bonded.
- Blistering and trapped moisture — poor bonding allows sections to lift from the deck.
- Storm exposure — wind can get beneath loose edges and peel the felt backwards.
- Impact damage — walking on a weak roof can split both the covering and boards.
- Moss and poor drainage — blocked gutters and accumulated debris prevent water from draining properly.
- Unsuitable materials — insufficient overlaps, loose fixings and inadequate adhesive may cause early failure.
Felt Products for Shed Roof Replacement
Contractors serving Bromley may recommend different felt systems according to the condition and use of the outbuilding.
Standard Mineral Shed Felt
Traditional green or black mineral felt is often chosen for straightforward, low-cost re-covering. Correct fitting is important because loose edges and failed seams are common causes of early leaks.
Heavy-Duty Shed Felt
A higher-grade felt product can offer improved durability compared with basic shed felt. A contractor can explain which products are suitable for the roof and budget.
Self-Adhesive Shed Felt
Peel-and-stick products bond directly to a properly prepared deck without torch application. A roofer can advise whether the existing roof deck is suitable.
Torch-On Felt for Suitable Outbuildings
A professional built-up felt system may provide a stronger covering for a suitable outbuilding. This type of work should only be completed by a roofer with suitable training, equipment and insurance.
Underlay and Multi-Layer Felt Systems
A multi-layer felt system may be recommended for larger or more valuable outbuildings. This approach normally costs more than a basic single-layer shed felt replacement.
Shed Roof Felt Replacement Services in Bromley
Stripping the Old Roof Covering
- Taking up the failed covering to expose the timber beneath.
- Removing old nails, staples and loose adhesive.
- Inspecting the roof deck once the old felt is removed.
- Removing material that could affect bonding.
- Taking away old felt and damaged timber.
Repairing Rotten Shed Roof Decking
Once the covering is stripped, hidden damage may be found in the boards or supporting frame.
- Replacing rotten plywood or OSB roof sheets.
- Repairing traditional boarded shed roofs.
- Replacing structural members damaged by water.
- Correcting sagging areas.
- Renewing the timber around the roof perimeter.
- Reducing ponding on flat and shallow roofs.
Complete Shed Re-Felting
Complete felt replacement is normally recommended when the existing material has widespread cracking or several leaks.
Edges, corners and ridge details must be finished carefully to prevent wind and rain getting underneath.
Partial Felt Replacement
A roofer may renew a damaged slope while leaving sound felt elsewhere in place. If several areas are already deteriorating, complete replacement may be more economical.
Ridge, Edge and Fascia Work
- Securing the roof perimeter against wind uplift.
- Directing rainwater away from the timber beneath.
- Installing or replacing timber edge battens.
- Adding a separate ridge strip where required.
- Checking vulnerable details for gaps.
- Connecting the roof covering with existing guttering.
Emergency Re-Felting After High Winds
- Making displaced roof covering safe.
- Installing temporary waterproof protection.
- Repairing holes caused by storm debris.
- Restoring the roof perimeter before new felt is fitted.
- Inspecting the roof frame for movement.
Other Shed Roofing Options in Bromley
Depending on the roof design and budget, a contractor may suggest a longer-lasting alternative.
EPDM Rubber Roofing
A rubber roof may suit homeowners who want a covering with fewer joints and a longer expected lifespan. The initial cost is normally higher than felt, but fewer future replacements may be needed.
Corrugated Bitumen Sheets
Lightweight roof panels can provide an alternative to felt where the structure and pitch are suitable. A contractor can confirm whether the existing structure is suitable.
Metal Roofing Sheets
Corrugated steel sheets can provide a robust covering for suitable outbuildings. Edges, overlaps and ridge details must be fitted correctly.
GRP Fibreglass Roofing
Fibreglass may be an option for some flat-roofed sheds, workshops and garden rooms. A local contractor can advise whether the building is appropriate for fibreglass.
Types of Sheds and Outbuildings Re-Felted
Local contractors may re-felt many types of timber and masonry outbuilding.
- Timber sheds with a central ridge.
- Pent sheds.
- Low-pitched timber roofs.
- Larger timber workshops.
- Summerhouses and cabins.
- Insulated outdoor workspaces.
- Purpose-built garden stores.
- Kennels and animal shelters.
- Larger felt-covered outbuildings.
- Small masonry stores and workshops.
How Shed Roof Felt Is Replaced
-
Assessing the shed covering
Edges, ridges and supporting timbers are checked before the work is priced.
-
Removing the old felt
The failed covering is stripped so the boards beneath can be inspected.
-
Completing timber work
Soft or rotten decking is removed and replaced.
-
Cleaning and drying the deck
Good preparation helps adhesive and felt bond correctly.
-
Installing the replacement felt
The roofer uses compatible adhesive and fixings for the product.
-
Completing the waterproof details
Felt is fixed around the eaves, verges and apex.
-
Checking the completed roof
The work area is cleared and maintenance advice may be provided.
How Long Does Shed Felt Replacement Take?
Many standard shed roofs can be completed within several hours if the boards are sound. The contractor should explain the likely duration before the work begins.
Cost of Replacing Shed Roof Felt
Prices vary according to the grade of felt, access and whether rotten boards need replacing.
The final price can be influenced by:
- The length and width of the roof.
- The number of roof slopes.
- The specification of the replacement covering.
- The condition of the roof boards.
- The condition of the supporting frame.
- Narrow gates, steps or restricted working space.
- The height and position of the building.
- The volume of old felt and damaged timber.
- Any extra drainage or finishing work.
Measurements and photographs may help a contractor provide an initial estimate.
Submit your details and compare prices from local shed roofing specialists serving Bromley.
Helping Local Roofers Quote for the Work
Providing useful details can help contractors understand the likely work involved.
- The roof length and width.
- How the shed roof is designed.
- The age of the existing felt.
- The areas where damage can be seen.
- When the problem was first noticed.
- Whether the boards appear soft or sagging.
- Whether you want standard or heavy-duty felt.
- Any obstacles surrounding the building.
- Your preferred timescale.
A contractor may request images before arranging a visit.
What to Check Before Hiring a Roofer
Every contractor introduced through the service operates as an independent business.
- Check that the contractor holds suitable insurance.
- Check whether the roofer regularly works on sheds.
- Obtain a clear written quotation.
- Ask about the grade and expected lifespan.
- Confirm the cost of likely board replacement.
- Confirm whether edge battens and ridge work are included.
- Ask who will take away the old felt.
- Confirm how long the work should take.
- Check VAT and payment terms.
- Confirm whether workmanship and materials are covered.
Nearby Areas Covered
As well as Bromley, local shed roofing contractors may cover nearby areas throughout Greater London, including Acton, Barnet, Camden, Central London, Chiswick, Clapham, Ealing. Coverage can vary according to the service and location.
Frequently Asked Questions
How often does shed roof felt need replacing in Bromley?
There is no fixed lifespan for every felt roof. Basic mineral felt may last around five to ten years, while heavier-duty products can last longer. Roofs that hold standing water may deteriorate faster.
Can new shed felt be installed over old felt?
Installing new felt directly over the existing layer is not suitable for every roof. Stripping the old felt allows the boards to be checked for rot, damp and movement.
Can rotten roof boards be replaced during re-felting?
Damaged decking should be renewed before the replacement felt is installed. Any additional timber work should be clearly explained in the quotation.
Which type of felt is best for a shed roof?
The best choice depends on the shed design, budget and expected lifespan. Torch-on systems may suit some larger outbuildings but are not appropriate for every timber structure.
Can I replace shed roof felt myself in Bromley?
The work involves more than rolling new material over the existing surface. The overlaps, edges and ridge must be secured properly to prevent leaks.
How long does shed roof felt replacement take?
Many standard sheds can be re-felted during one visit. The contractor should confirm the likely timescale before starting.
Can shed roof felt be replaced in wet weather?
Permanent re-felting normally requires a reasonably dry roof deck. The contractor will decide whether the weather allows the work to proceed.
Should I choose EPDM instead of felt for my shed in Bromley?
Both EPDM and felt can work well when installed on a suitable roof deck. Felt may suit a basic garden shed, while EPDM is often selected for workshops and garden offices.
How much does shed roof felt replacement cost in Bromley?
A small basic shed will normally cost less than a large workshop with rotten boards. A site visit may still be required before a fixed price is confirmed.
How do I get shed roof felt replacement quotes in Bromley?
Complete the online enquiry form with your postcode and details of the shed. Suitable local roofers may contact you to discuss the work or arrange an inspection. Submitting the form does not commit you to accepting any quote.