Shed Roof Felt Replacement in Wiltshire
Across Wiltshire, many garden sheds and timber outbuildings eventually need their old roofing felt stripped and replaced. Even good-quality felt can deteriorate over time, particularly on roofs exposed to strong winds, heavy rain or overhanging trees.
A failing felt roof may begin with a small tear or lifted edge, but water can soon reach the roof boards and supporting timbers beneath. Prompt re-felting is often cheaper than waiting until the boards and roof frame also need replacing.
We help customers in towns, villages and rural areas throughout Wiltshire request quotations for shed re-felting and related timber repairs. Submit one online enquiry and you may receive contact from up to four local contractors.
How to Tell If Shed Felt Has Failed
Many homeowners first notice a problem when water appears inside the shed, although the covering may have been deteriorating for some time.
You may need a full felt replacement if you notice:
- Visible tears in one or more areas of the covering.
- The covering pulling away from fascia boards or edge battens.
- Blisters, bubbles or raised sections.
- Overlapping felt sections that are no longer sealed.
- A covering that has been repaired many times but continues to leak.
- Dark staining or damp marks inside the shed.
- Timber decking that has started to rot.
- Felt losing its textured weather-resistant coating.
- Moss and debris holding moisture against the roof.
- Storm damage causing loose or torn felt.
Why Shed Roof Felt Fails in Wiltshire
Shed roofing felt can fail for several reasons, and more than one problem may affect the roof at the same time.
- Natural deterioration over time — older felt becomes more likely to crack, split and lift.
- UV and sunlight damage — repeated heating and cooling can cause the felt to expand, contract and crack.
- Repeated freezing and thawing — moisture in small cracks can freeze and widen the damage.
- Felt pulling away from the perimeter — poorly secured edges may gradually loosen and curl.
- Failed overlaps and seams — incorrectly formed laps may open as the roof moves.
- Loss of adhesion — air or water trapped below the covering can create raised areas that later split.
- Storm damage — once an edge becomes loose, further wind damage can spread quickly.
- Falling branches and debris — debris falling from nearby trees may damage the roof surface.
- Poor roof maintenance — moss holds moisture against the felt and may grow into laps and joints.
- Incorrect fitting — using the wrong product for the roof pitch or exposure can shorten its lifespan.
What Local Shed Roofing Contractors Can Do
A contractor should inspect the existing covering, roof deck, edges and supporting timbers before recommending a solution.
Preparing a Shed Roof for Re-Felting
- Removing old mineral felt from the full roof.
- Clearing previous fixings from the roof deck.
- Assessing the condition of boards and supporting timbers.
- Clearing moss, dirt and debris.
- Taking away waste felt and damaged timber.
Traditional Shed Felt Installation
Standard mineral felt is often chosen as a practical and affordable replacement for garden sheds. The material should be laid over a dry, stable roof deck and secured carefully around the edges.
Upgraded Felt Roof Coverings
Heavy-duty felt can provide better durability than the cheapest shed roofing products. Better-quality products can provide a stronger surface and more reliable lap joints.
Professional Torch-Applied Felt
Some larger sheds, workshops and outbuildings may be suitable for torch-on felt installed by an experienced roofer. The building and roof deck must be suitable for the method, particularly where combustible timber is present.
Flame-Free Felt Installation
Self-adhesive felt can provide a flame-free alternative for timber sheds and outbuildings. Careful alignment and firm pressure are needed to avoid wrinkles and trapped air.
Timber Repairs Beneath the Felt
Once the old felt is removed, hidden damage may be found in the boards underneath.
- Removing soft sheet decking and fitting new material.
- Renewing individual sections affected by decay.
- Strengthening sagging roof areas.
- Replacing structural timbers damaged by leaks.
- Providing a secure edge for the new felt.
- Improving the roof fall.
Securing the Roof Perimeter
- Finishing the material neatly at all roof edges.
- Dressing felt over fascia boards.
- Providing a firm fixing point around the roof.
- Sealing the highest point of an apex shed roof.
- Finishing corners and joints carefully.
- Ensuring run-off enters the gutter correctly.
Localised Re-Felting Work
Where only one side or section of a roof has failed, partial replacement may sometimes be possible. The age and condition of the old covering will affect whether a partial replacement is worthwhile.
Emergency Shed Re-Felting
- Removing felt that has torn or blown loose.
- Protecting the shed until permanent work can begin.
- Renewing sections of the deck affected by debris.
- Refitting ridge strips and edge battens.
- Inspecting rafters and joists after severe weather.
Should I Replace Felt with Another Material?
Some homeowners choose to replace old felt with a different roofing material rather than fitting another felt covering.
Rubber Membrane Shed Roofs
A properly installed EPDM membrane can provide a durable, low-maintenance surface. It generally costs more than standard felt but may last considerably longer.
Lightweight Roof Sheet Replacement
These sheets are available in several colours and are fixed to suitable supports. Correct overlaps, ridge pieces and fixings are essential for a watertight result.
Corrugated Steel Shed Roofing
A sheeted metal roof may be useful for larger outbuildings requiring a durable finish. Condensation control, ventilation and secure fixings should be considered as part of the installation.
Fibreglass Shed Roof Replacement
A professionally installed GRP system can provide a durable finish with relatively few joints. The roof deck must be correctly prepared and stable.
Buildings Suitable for Shed Felt Replacement
You can request quotations for a range of domestic and light commercial structures.
- Apex garden sheds.
- Single-slope garden sheds.
- Simple flat timber roofs.
- Garden workshops.
- Timber garden rooms.
- Home offices built in the garden.
- Bike stores, bin stores and log stores.
- Small stable roofs.
- Larger felt-covered structures.
- Brick-built and block-built outbuildings.
How Shed Roof Felt Is Replaced
-
Initial roof inspection
The contractor checks the felt, boards, edges and supporting timbers to identify visible damage.
-
Stripping the failed covering
Previous patches and damaged material are taken off before the new system is installed.
-
Checking and repairing the deck
The contractor checks whether plywood, OSB or timber boards remain sound.
-
Getting the roof ready for new felt
The deck is cleaned, dried and made smooth enough for the replacement material.
-
Laying the replacement covering
The roofer works from the lower edge upwards so laps shed water correctly.
-
Finishing edges and ridge details
Edge battens, fascia details and ridge strips are completed.
-
Completing the job
Old material and waste are removed where this is included in the quotation.
Typical Re-Felting Timescales
The time required depends on the size and shape of the roof and whether hidden damage is found.
Larger workshops, complex roof shapes and jobs involving rotten boards will normally take longer. Rain, strong winds and very low temperatures can delay installation.
Shed Felt Replacement Prices Across Wiltshire
The cost of replacing shed roof felt in Wiltshire depends on the size of the roof, the product selected and the condition of the timber deck.
A contractor may consider:
- The size of the shed or outbuilding.
- Whether the roof is apex, pent or flat.
- Whether standard, heavy-duty or self-adhesive felt is used.
- The amount of water damage beneath the old felt.
- Any structural timber repairs.
- The distance materials must be carried.
- The amount of safe working space around the roof.
- Removal and disposal of old materials.
- Additional edge and drainage work.
A site visit may still be necessary before a fixed price can be confirmed.
Complete the free enquiry form to compare shed felt replacement quotes across Wiltshire.
Information to Give a Shed Roofing Contractor
A good description may help reduce delays before an inspection or quotation.
- The approximate length and width of the shed.
- The number of slopes and roof shape.
- How long the existing covering has been in place.
- Any visible tears, cracks or lifted edges.
- Details of damp patches or water entry.
- Signs that the deck may need replacing.
- The type of replacement material preferred.
- The width of gates and distance from the road.
- When you would like the work completed.
Photographs of the full roof, damaged areas and the inside of the shed can also be helpful.
How to Compare Shed Roof Replacement Quotes
The contract for the re-felting work will be made directly between you and the contractor you choose.
- Ask for proof of suitable public liability insurance.
- Look at photographs of previous shed re-felting work.
- Avoid relying only on a verbal price.
- Confirm the felt product being proposed.
- Ask how hidden timber rot will be handled.
- Ask whether fascia repairs form part of the quotation.
- Check whether waste removal is included.
- Ask when the contractor can attend.
- Avoid paying the full amount before work begins.
- Ask for guarantee details in writing.
Shed Felt Replacement by Town in Wiltshire
We help homeowners look for shed roofing specialists in communities throughout Wiltshire. Select your nearest town below to view local information and request quotations.
Frequently Asked Questions
How long does shed roof felt last in Wiltshire?
How long a felt roof lasts varies according to the product used and the conditions around the building. A stronger felt system may provide ten to fifteen years or more in favourable conditions. Roofs beneath trees, in exposed positions or with poor drainage may deteriorate more quickly.
Can new shed felt be fitted over the old felt?
Some installers may over-felt a sound roof, although this can hide damage beneath. A clean and stable deck normally provides a better base for the new covering. The contractor should explain why over-felting is suitable before recommending it.
Can rotten boards be replaced during shed re-felting?
A contractor can remove soft plywood, OSB or timber boarding before installing the new felt. Any additional timber work should be explained clearly in the quotation.
What type of felt is best for a shed roof?
The best option depends on the roof design, budget and expected lifespan. Self-adhesive systems provide a flame-free option for suitable timber roofs.
Can I replace shed roof felt myself?
The job involves more than simply rolling new felt over the surface. Correct overlaps, secure edges and a dry, stable deck are needed for a waterproof result.
How long does shed roof felt replacement take?
Many standard garden sheds can be completed during one visit. The contractor should provide an expected timescale with the quotation.
Can shed felt be replaced in wet weather?
Permanent re-felting normally requires a dry roof deck and suitable weather conditions. The contractor will decide whether the weather allows the job to proceed.
Should I choose felt or EPDM for my shed roof?
Both materials can work well when installed on a suitable deck. Traditional felt may suit a basic garden shed, whereas EPDM is often chosen for workshops, garden offices and larger outbuildings.
How much does shed roof felt replacement cost in Wiltshire?
Prices vary according to access, materials and the amount of preparation required. A site inspection may be needed before a fixed price is confirmed.
How do I get shed roof felt replacement quotes in Wiltshire?
Complete the online enquiry form with your postcode and details of the shed. Suitable shed roofing specialists may contact you to discuss the project or provide a quotation. Submitting an enquiry does not commit you to accepting a quote.