Local Shed Roof Replacement Specialists in Bacup
Replacing a worn or badly damaged shed roof is one of the most frequently requested small roofing jobs in Bacup. Years of rain, frost, sunlight and strong winds can cause felt, membranes and roof sheets to crack, lift or lose their waterproof finish.
Not every roof fault requires a full rebuild, although replacement may provide better value when several areas have failed. The amount of work required will depend on the age of the shed, the existing material and the condition of the structure underneath.
Shed-Roof.co.uk helps homeowners in Bacup find local contractors for complete shed roof replacement. Submit the short form and compare quotations from up to four suitable local roofers.
Signs Your Shed Roof Needs Replacing
Shed roofs often deteriorate slowly, although storms and falling branches can also cause sudden damage.
You may need a full replacement if you notice:
- Damp patches spread across different roof sections.
- Felt that is badly cracked, brittle or blistered.
- Roof edges moving in strong winds.
- A roof requiring attention after every spell of bad weather.
- Soft, swollen or rotten roof boards.
- Visible dips where rainwater collects.
- Movement around the roof frame or fascia boards.
- Cracked corrugated panels or rusted metal sheets.
- Open gaps around edges, ridges or sheet overlaps.
- Moisture that does not clear during dry weather.
Damage Caused by an Old Shed Roof
Water entering through an old covering gradually affects the roof deck, supporting frame and walls of the shed.
Once several timber components have deteriorated, the roof may begin to sag or move. A new covering should not be fitted over unstable or badly damaged boards.
Moisture can cause rust, mould and deterioration of anything stored inside the building. Avoid using wet electrical equipment until it has been inspected where necessary.
Replacing the roof before widespread rot develops will usually keep the project simpler and less expensive.
Shed Roof Replacement Options in Bacup
A local contractor may recommend different options after inspecting the pitch, deck and drainage.
Standard Mineral Shed Felt
Traditional shed felt is widely chosen where keeping the initial replacement price down is the main priority. Secure edges are important because loose felt can lift during strong winds.
Heavy-Duty Shed Felt
A higher-grade felt may offer improved resistance to tearing, sunlight and temperature changes. The roofer can explain the differences between the products included in each quotation.
Self-Adhesive and Cold-Applied Felt
Cold-applied products bond to a prepared deck without the use of a gas torch. The contractor should confirm that the system suits the roof pitch and deck.
Torch-On Felt for Suitable Outbuildings
A built-up felt system can provide a more substantial covering on an appropriate flat-roofed structure. Torch-on installation should only be completed by a contractor with suitable training, insurance and equipment.
EPDM Rubber Shed Roofing
Rubber roofing may suit homeowners who want a flexible covering with fewer joints than traditional felt. Rotten or uneven boards should be renewed before the membrane is fitted.
GRP Fibreglass Roofing
Fibreglass may be considered for workshops, garden rooms and some flat-roofed sheds. A local contractor can advise whether the shed structure is suitable.
Corrugated Bitumen Roof Sheets
Lightweight roof sheets provide an alternative to felt where the frame and roof pitch are suitable. Individual damaged sheets can often be replaced later if necessary.
Metal Shed Roofing
Corrugated steel can provide a robust replacement where the shed structure is suitable. Edges, overlaps, screws and ridge pieces must all be installed properly.
Plastic and Polycarbonate Roofing
Translucent panels can replace old or brittle plastic roofing on suitable outbuildings. Incorrectly fitted panels may crack around their fixings or leak at the joints.
Asbestos Cement Roof Removal and Replacement
An asbestos cement roof may need replacing if sheets have cracked, deteriorated or started leaking. Modern metal, bitumen or other suitable roof sheets can be fitted once the old covering has been removed safely.
What a Complete Shed Roof Replacement Includes
Stripping the Old Shed Roof
- Taking up failed material to expose the deck.
- Removing cracked or loose corrugated sheets.
- Clearing loose fixings and damaged battens.
- Including disposal within the written quotation.
Roof Board Replacement
- Removing soft sheet decking and fitting new panels.
- Renewing individual boards affected by decay.
- Strengthening bowed or sagging sections.
- Creating a stable base for new felt.
Rebuilding the Roof Frame
- Replacing rotten rafters and joists.
- Adding support to an under-built roof.
- Renewing decayed perimeter structure.
- Rebuilding a collapsed or storm-damaged roof.
Converting a Flat Roof to a Pent Roof
Any changes must suit the shed walls, frame and overall stability of the building.
- Increasing the roof fall to improve drainage.
- Installing a new single-slope frame.
- Changing the drainage and appearance of the shed.
- Adding stronger supports for sheet roofing.
Replacing Perimeter Timbers
- Providing a sound fixing surface for trims.
- Installing new verge boards.
- Directing water away from shed walls.
- Finishing corrugated and sheeted roofs.
- Sealing corners and junctions.
Rainwater Work During Roof Replacement
- Directing water away from the walls and base.
- Replacing cracked or leaking guttering.
- Adding a rainwater collection system.
- Sealing membranes around rainwater outlets.
- Improving the roof fall.
Adding or Replacing Roof Features
- Renewing damaged transparent sections.
- Adding rooflights to workshops or potting sheds.
- Improving airflow in enclosed outbuildings.
- Installing suitable flashings around openings.
- Closing redundant roof holes.
Emergency Shed Re-Roofing
- Preventing damaged sections from blowing away.
- Installing temporary waterproof protection.
- Taking down unstable roof sections.
- Installing a complete new covering after severe damage.
Buildings Suitable for Shed Roof Replacement
The service can be used for many domestic and light commercial outbuildings.
- Timber sheds with a central ridge.
- Pent sheds.
- Low-pitched outbuildings.
- Larger timber workshops.
- Garden offices.
- Garden leisure buildings.
- Purpose-built garden stores.
- Kennels and animal shelters.
- Garage outbuildings.
- Lean-to roof structures.
- Brick and block-built outbuildings.
- Prefabricated storage buildings.
How Contractors Replace a Shed Roof
-
Inspecting the shed and roof
The building is assessed to establish whether the structure can support the proposed replacement.
-
Selecting the new roof system
The homeowner and contractor discuss felt, EPDM, GRP and sheet roofing options.
-
Stripping the failed material
Waste material is separated and prepared for disposal.
-
Repairing the roof structure
The frame is strengthened and sagging areas are corrected.
-
Weatherproofing the shed
The felt, membrane or sheet system is installed according to its specification.
-
Finishing trims, ridges and gutters
The roof perimeter is checked for gaps and wind uplift risks.
-
Final inspection and clean-up
Old materials are removed where included in the quotation.
Choosing Between Repair and Replacement
A local repair may be appropriate when the roof is fairly new and damage is confined to one area.
A full re-roof is often recommended where the deck is rotten or the structure has started to sag.
Obtaining more than one opinion may help where contractors recommend very different solutions.
Time Needed to Replace a Shed Roof
Many standard garden shed roofs can be replaced within a day when the structure is sound.
Asbestos removal, difficult access and detailed roof features can also increase the duration.
Weather may affect the programme because many coverings require a dry deck and safe working conditions.
Cost of Replacing a Shed Roof
A basic felt re-cover will generally cost less than a full rebuild using EPDM, GRP or metal sheets.
Factors that can affect the price include:
- The total roof area.
- The complexity of the roof shape.
- The replacement covering selected.
- Whether plywood, OSB or timber boards need replacing.
- The amount of rebuilding required.
- A change in roof design.
- The amount of perimeter finishing.
- Any accessories added to the replacement roof.
- Garden access.
- Nearby fences, trees and neighbouring buildings.
- Whether specialist disposal is required.
- Emergency or temporary work.
A site visit may still be required before a fixed price is confirmed.
Tell us about the building and we will try to connect you with suitable contractors covering Bacup and nearby areas of Lancashire.
What to Include in Your Enquiry
The more detail you provide, the easier it is for a roofer to decide whether the job suits their services.
- The overall size of the building.
- Whether the roof is apex, pent or flat.
- Whether the roof is felt, rubber, metal or sheeted.
- Whether it has been repaired previously.
- Any known leaks or damp patches.
- Visible movement in the boards or frame.
- Visible damage from inside the shed.
- The replacement material you are considering.
- Any openings through the roof.
- Obstacles around the building.
- Your preferred timescale.
A contractor may request pictures before arranging a visit.
What to Check Before Hiring a Roofer
Every contractor introduced through the service operates as an independent business.
- Confirm that the business holds current insurance.
- Check whether the roofer has experience with your selected material.
- Obtain a detailed written quotation.
- Ask for the product and material specification.
- Confirm whether the quote is for an overlay or full replacement.
- Confirm how rotten boards will be handled.
- Ask how the roof edges will be completed.
- Check for additional disposal charges.
- Agree the expected start date and duration.
- Make sure the total cost is clear.
- Check any conditions attached to the guarantee.
Also Serving the Wider Lancashire Area
Roofers serving Bacup may also work in surrounding towns and villages such as Todmorden, Burnley, Rochdale, Accrington, Blackburn, Rawtenstall, Nelson. Submit your postcode to check whether suitable contractors are available in your area.
Frequently Asked Questions
How do I know if my shed roof needs replacing in Bacup?
A replacement may be required where the roof has several leaks, widespread covering damage or rotten timber beneath it. An older roof may still be repairable if the material and deck remain sound.
Can only the roof covering be replaced?
A straightforward re-cover is possible where the timber beneath remains in good condition. Rotten or sagging boards should be renewed before the replacement material is fitted.
What is the best replacement material for a shed roof?
Different coverings suit different outbuildings and homeowner priorities. A local roofer can compare the practical advantages and prices.
Is EPDM better than felt for a shed roof?
EPDM usually has a higher initial cost but may last considerably longer than basic felt. Both materials require correct preparation and installation.
Can a sagging shed roof be replaced?
The contractor may need to replace or reinforce rafters, joists and decking. Simply placing a new covering over a sagging roof will not solve the structural fault.
Can the roof shape be changed during replacement?
A new roof frame can sometimes improve drainage or provide more usable internal space. The contractor can advise whether the alteration is practical.
How long does shed roof replacement take in Bacup?
A straightforward replacement on a small shed may be completed within several hours or one working day. Bad weather may also delay the work.
Can a shed roof be replaced in wet weather?
Temporary waterproof protection may be fitted until conditions improve. Strong winds can also make handling felt, membranes and roof sheets unsafe.
Do I need to empty the shed before roof replacement?
Dust, debris and small pieces of covering may fall inside during the work. Electricity may need to be isolated if roof work could affect wiring or fittings.
Do I need planning permission for shed roof replacement in Bacup?
A straightforward like-for-like replacement is normally treated as repair and maintenance rather than a new development. Additional restrictions may apply in conservation areas or where previous planning conditions affect the outbuilding.
What happens to the old shed roof materials?
Some roofers may charge separately for waste removal. Suspected asbestos cement requires suitable handling and lawful disposal.
How much does shed roof replacement cost in Bacup?
A basic felt re-cover normally costs less than a full rebuild using EPDM, GRP or metal sheets. Comparing local quotations provides the most accurate cost for the project.
How do I get shed roof replacement quotes in Bacup?
Complete the online enquiry form with your postcode and details of the shed. Suitable local shed roofers may contact you to discuss the work or arrange an inspection. Submitting an enquiry does not commit you to accepting a quote.